CNY64 Optokoppler CRI 50-300% NPN Fototransistor 32V 50mA Schutzklasse II

CNY64-3 Optokoppler Schutzklasse II  

Technische Daten Optokoppler DIP-4 

Circuits for safe protective separation against electrical shock according to safety class II
DIN EN 60747-5-2 / DIN EN 60747-5-5 pending, table 2, IEC60335, IEC60601, IEC60065, Medical equipment
suitable for: Switch-mode power supplies, line receiver, computer peripheral interface, microprocessor system interface...... 

• Verstärkungsfaktor = 50-300 % CTR ( CTI = >200 ) 
• Rated impulse voltage (transient overvoltage) Viotm 8000V Peak 
• Isolationsspannung getestet bis 2,8KV = 2800V Vpd Peak
• Rated isolation voltage (RMS includes DC) VIOWM = 1000 VRMS (1450 V peak) 
• Operating Temperature -55°C .... +85°C 

LED des Optokopplers ( typische Ansteuerung ) 

• Vorwärtsspannung = 1,25V typisch ( max 1,5V ) Forward Voltage
• LED Vorwärtsstrom If = 75mA ( IF ) Ifsm kurzfristig 120mA (10us 1500mA) 
• Reverse Voltage Vr 5,0V 
• Power Dissipation 120mW 
• Capazität: 50pF ( VR = 0V 1Mhz )

Transistor Ausgang ( NPN ) 

• Collectorstrom max. = 50mA ( Ic max ) Peak kurzfristig 100mA 
• Collector-Emitter-Spannung max = 30V ( bis zu max 32V DC ) 
• Leistung / Power Dissipation = 130mW Peak 250mW 
• Cut-off frequency 110Khz 
• Turn-on time = Ton = 5us 100R 5V 
• Turn-off time = Toff = 3,0us 100R 5V 
• Fall time = Tf = 2,7us
• Delay time = Td = 2,6us
• RoHs Ja / DIN EN60747-5-2

• Abmessungen: siehe Datenblatt oder weitere Bilder L: 12,8mm / B: 7,2mm / H: 6,1mm mit Pins 9,1mm
  Rastermass 5,08mm